Yıl 2018, Cilt 6, Sayı 4, Sayfalar 745 - 753 2018-08-01

Experimental Vibration Analysis of Titanium Aluminum Nitride (TiAlN) Coated Milling Cutting Tool Effects on Surface Roughness of AISI 4140 Steel Products
AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi

Mehmet YILDIZ [1] , Hamit SARUHAN [2]

89 150

The vibration response of material removal process in milling has a significant effect on surface roughness of the product with respect to cutting tool coating. Recent requirements for improving of surface roughness have heightened the need for milling with coated cutting tools. The main objective of this study is to experimentally investigate the role of vibration behavior of cutting tool coated with titanium aluminum nitride (TiAlN) on an AISI 4140 alloy steel workpiece surface roughness. The vibration data from workpiece were recorded for three milling cutting tools with tool diameters of 10, 12, and 16  and for each diameter different coating depth of 0.0, 2.0, 3.0, and 5.0 (microns) were used respectively. Vibration signals of workpiece during milling process in two directions were collected and a roughness tester was used to measure the surface roughness of workpiece. The results showed that induced vibration has a significant effect on surface roughness of workpiece. It has been observed that the maximum surface roughness average was obtained for 16  tool diameters with coated depth of 5.0  while the minimum surface roughness average was obtained for 10 mm tool diameters with coated depth of 3.0. Surface roughness can be improved by reduction of the intensity of sources of vibration by using appropriate cutting tool coating depth.
AISI 4140, Milling, Coated cutting tool, TiAlN, Surface roughness, Vibration analysis.
  • Lipski J., Litak G., Rusinek R., Szabelski K., Teter A., Warmindski J. and Zaleski K. “Surface Quality of a Work Material Influence on Vibrations in a Cutting Process”, Journal of Sound and Vibration, Technical University of Lublin, 2001.
  • Thomas L. Lago, Sven Olsson, Lars Hakansson and Ingvar Claesson, “Performance of a Chatter Control System For Turning and Boring Applications”, 4th GRACM Congress on Computational Mechanics, GRACM., Patras, 27-29, June, pp. 3-4, 2002.
  • Al-Habaibeh A. and Gindy N.; “A new approach for systematic design of condition monitoring systems for milling operation”, Journal of Material Processing Technology, 2000, 107, pp. 243-251.
  • S. C. Eze, C. O. Izelu, B. U. Oreko, B. A. Edward, “Experimental Study of Induced Vibration and Work Surface Roughness in the Turning of 41Cr4 Alloy Steel using Response Surface Methodology International Journal of Innovative Research in Science, Engineering and Technology’’, Vol. 2, Issue 12, 2013.
  • Y. Altintas and M.R. Khoshdarregi; “Contour error control of CNC machine tools with vibration avoidance”; CIRP Annals - Manufacturing Technology, 2012, 61, pp. 335–338.
  • Armando Italo Sette Antonialli, Anselmo Eduardo Diniz, Robson Pederiva; “Vibration analysis of cutting force in titanium alloy milling”; International Journal of Machine Tools & Manufacture; 2010, 50, pp. 65-74.
  • Baojia Chen, Xuefeng Chen, Bing Li, Zhengjia He, Hongrui Cao, GaigaiCai;“Reliability estimation for cutting tools based on logistic regression model using vibration signals”; Mechanical Systems and Signal Processing; 2011, 25, pp 2526-2537.
  • S. S. Abuthakeer, P.V. Mohanram, G. Mohan Kumar; “Prediction and Contour of Cutting to Vibration in C Lathe with Anova and Ann”; International Journal of Lean Thinking, Volume 2, Issue 1, June 2011.
  • O. Özşahin, E. Budak, H.N. Özgüven, “Identification of bearing dynamics under operational conditions forchatter stability prediction in high speed machining operations Precision Engineering’’ 42 (2015) 53–65.
  • Sadettin Orhan, Ali Osman Er, Necip Camus-cu, Ersan Aslan, “Tool wear evaluation by vibration analysis during end milling of AISI D3 cold work tool steel with 35 HRC hardness.’’ NDT&E International 40 (2007) 121–126
  • I. Yesilyurt and H. Ozturk, “Tool condition monitoring in milling using vibration analysis, International Journal of Production Research,’’ Vol. 45, No. 4, 15 February 2007, 1013–1028
  • Luke H. Huang, Joseph C. Chen., “A Multiple Regression Model to Predict In-Process Surface Roughness in Turning Operation Via Accelerometer”, Journal of Industrial Technology, "Internet" (www.nait.org)., Vol. 17, No.2, pp. 2-7, 2001.
  • Bisu, C., “Three-Dimensional Vibration Analysis for On line Monitoring of Milling Process and Spindle Process, 24th International Congress on Sound and Vibration’’, London, 23-27 July 2017
Birincil Dil en
Konular Mühendislik
Dergi Bölümü Makaleler
Yazarlar

Yazar: Mehmet YILDIZ
Kurum: DÜZCE ÜNİVERSİTESİ
Ülke: Turkey


Yazar: Hamit SARUHAN (Sorumlu Yazar)
Kurum: DÜZCE ÜNİVERSİTESİ
Ülke: Turkey


Bibtex @araştırma makalesi { dubited416555, journal = {Düzce Üniversitesi Bilim ve Teknoloji Dergisi}, issn = {}, eissn = {2148-2446}, address = {Düzce Üniversitesi}, year = {2018}, volume = {6}, pages = {745 - 753}, doi = {}, title = {AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi}, key = {cite}, author = {YILDIZ, Mehmet and SARUHAN, Hamit} }
APA YILDIZ, M , SARUHAN, H . (2018). AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi. Düzce Üniversitesi Bilim ve Teknoloji Dergisi, 6 (4), 745-753. Retrieved from http://dergipark.gov.tr/dubited/issue/38650/416555
MLA YILDIZ, M , SARUHAN, H . "AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi". Düzce Üniversitesi Bilim ve Teknoloji Dergisi 6 (2018): 745-753 <http://dergipark.gov.tr/dubited/issue/38650/416555>
Chicago YILDIZ, M , SARUHAN, H . "AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi". Düzce Üniversitesi Bilim ve Teknoloji Dergisi 6 (2018): 745-753
RIS TY - JOUR T1 - AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi AU - Mehmet YILDIZ , Hamit SARUHAN Y1 - 2018 PY - 2018 N1 - DO - T2 - Düzce Üniversitesi Bilim ve Teknoloji Dergisi JF - Journal JO - JOR SP - 745 EP - 753 VL - 6 IS - 4 SN - -2148-2446 M3 - UR - Y2 - 2018 ER -
EndNote %0 Düzce Üniversitesi Bilim ve Teknoloji Dergisi AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi %A Mehmet YILDIZ , Hamit SARUHAN %T AISI 4140 Islah Çeliğinin TiAlN Kaplı Frezelerle İşlenmesi Sırasında Oluşan Yüzey Pürüzlülüğü ve Titreşiminin Deneysel Olarak İncelenmesi %D 2018 %J Düzce Üniversitesi Bilim ve Teknoloji Dergisi %P -2148-2446 %V 6 %N 4 %R %U
ISNAD YILDIZ, Mehmet , SARUHAN, Hamit . "Experimental Vibration Analysis of Titanium Aluminum Nitride (TiAlN) Coated Milling Cutting Tool Effects on Surface Roughness of AISI 4140 Steel Products". Düzce Üniversitesi Bilim ve Teknoloji Dergisi 6 / 4 (Ağustos 2018): 745-753.