Yıl 2018, Cilt 5, Sayı 3, Sayfalar 904 - 908 2018-09-30

Characterization of Borided DIN X165CrMoV12 Steel

Atila Gürhan ÇELİK [1]

21 25

In the present study, characterization properties of borides formed on DIN X165CrMoV12 steel have been investigated. Boriding was performed in a solid medium consisting of Ekabor-II powders at 1073 and 1273K for 4 h. The boride layer was characterized by optical microscopy, X-ray diffraction technique and the micro-Vickers hardness tester.  X-ray diffraction analysis of boride layers on the surface of the steels revealed the existence of FexBy and CrxBy compounds. Depending on the chemical composition of substrates, the boride layer thickness on the surface of the DIN X165CrMoV12 steel was found to be 32.75 μm and 78.92 μm at 1073 and 1173K for 4 h, respectively. The hardness of the boride compounds formed on the surface of the DIN X165CrMoV12 steel ranged from 1638 to 1892 HV0,1, whereas Vickers hardness values of the untreated steel DIN X165CrMoV12 was 432 HV0,1.

DIN X165CrMoV12; Boriding; XRD; Micro-hardness.
  • [1] Ozdemir, O., Usta, M., Bindal, C., Ucisik A.H., Hard iron boride (Fe2B) on 99.97wt% pure iron, Vacuum, 2006, vol.80, 1391-1395.[2] Muhammad, W., Boriding of high carbon high chromium cold work tool steel, Materials Science and Engineering, IOP Conf. Ser.: 2014, vol. 60, 012062[3] Celik, O.N., Gasan, H., Ulutan, M., Saygin, M., An investigation on fatigue life of borided AISI 1010 steel, Journal of achievements in Materials and Manufacturing Engineering, 2009, 32 13-17[4] Castro, G.R., Silva, I.C., Trinidad, J.M., López, U.F., Morales, D.M., Hernández, J.V., Effect of Boriding on the Mechanical Properties of AISI 1045 Steel, Advanced Materials Research, 2009, vol.65, 63-68.[5] Sen, S., Sen, U., Bindal, C., Tribological Properties of Oxidised Boride Coatings Grown on AISI 4140 steel, Mater. Lett. 2006, vol.60, 3481-3486.[6] Keddam, M., Chentouf, S.M., A Diffusion Model for Describing the Bilayer Growth (FeB/ Fe2B) during the Iron Powder-Pack Boriding, Applied Surface Science, 2005, vol. 252, 393–399[7] Gunes, I., Wear Behavior of Plasma Paste Boronized of AISI 8620 Steel with Borax and B2O3 Paste Mixtures, J. Mater. Sci. Technol., 2013, vol. 29, 662–668.[8] Makuch, N., Kulka, M., Piasecki, A., The Effects of Chemical Composition of Nimonic 80A-Alloy on the Microstructure and Properties of Gas-Borided Layer, Surf. Coatings Technol., 2015, vol. 276, 440-455.[9] Khalili, Aria, Effective Boronizing Process for Age Hardened Inconel 718" (2017). Electronic Thesis and Dissertation Repository. 4507 [10] Keddam, M., Simulation of the Growth Kinetics of FeB and Fe2B Phases on the AISIM2 Borided Steel: Effect of the Paste Thickness, Int. J. Mater. Res. 2009, 100, 901-905. [11] Bindal, C., Ucisik, A.H., Characterization of borides formed on impurity-controlled chromium-based low alloy steels. Surf. Coat. Technol. 1999, 122, 208-213.[12] Ozbek, I., Bindal, C., Kinetics of borided AISI M2 high speed steel. Vacuum, 2011, vol.6, 391-397.[13] Gunes, I., Yıldız I., Rate of growth of boride layers on steels, Oxidation Communications, 2015, vol. 38(4A), 2189-2198 [14] Cimenoglu, H., Atar, E., Motallebzadeh, A., High temperature tribological behaviour of borided surfaces based on the phase structure of the boride layer, Wear, 2014, vol. 309, 152-158.[15] Kulka, M., Makuch, N., Pertek, A., Microstructure and properties of laser-borided 41Cr4 steel, Optics & Laser Technology, 2013, vol.45, 308-318.
Birincil Dil tr
Konular Mühendislik
Dergi Bölümü Makaleler
Yazarlar

Yazar: Atila Gürhan ÇELİK (Sorumlu Yazar)
Kurum: Giresun üniversitesi
Ülke: Turkey


Bibtex @araştırma makalesi { ecjse458766, journal = {El-Cezeri Journal of Science and Engineering}, issn = {2148-3736}, address = {Selami ŞAŞMAZ}, year = {2018}, volume = {5}, pages = {904 - 908}, doi = {10.31202/ecjse.458766}, title = {Characterization of Borided DIN X165CrMoV12 Steel}, key = {cite}, author = {ÇELİK, Atila Gürhan} }
APA ÇELİK, A . (2018). Characterization of Borided DIN X165CrMoV12 Steel. El-Cezeri Journal of Science and Engineering, 5 (3), 904-908. DOI: 10.31202/ecjse.458766
MLA ÇELİK, A . "Characterization of Borided DIN X165CrMoV12 Steel". El-Cezeri Journal of Science and Engineering 5 (2018): 904-908 <http://dergipark.gov.tr/ecjse/issue/39488/458766>
Chicago ÇELİK, A . "Characterization of Borided DIN X165CrMoV12 Steel". El-Cezeri Journal of Science and Engineering 5 (2018): 904-908
RIS TY - JOUR T1 - Characterization of Borided DIN X165CrMoV12 Steel AU - Atila Gürhan ÇELİK Y1 - 2018 PY - 2018 N1 - doi: 10.31202/ecjse.458766 DO - 10.31202/ecjse.458766 T2 - El-Cezeri Journal of Science and Engineering JF - Journal JO - JOR SP - 904 EP - 908 VL - 5 IS - 3 SN - 2148-3736- M3 - doi: 10.31202/ecjse.458766 UR - http://dx.doi.org/10.31202/ecjse.458766 Y2 - 2018 ER -
EndNote %0 El-Cezeri Journal of Science and Engineering Characterization of Borided DIN X165CrMoV12 Steel %A Atila Gürhan ÇELİK %T Characterization of Borided DIN X165CrMoV12 Steel %D 2018 %J El-Cezeri Journal of Science and Engineering %P 2148-3736- %V 5 %N 3 %R doi: 10.31202/ecjse.458766 %U 10.31202/ecjse.458766
ISNAD ÇELİK, Atila Gürhan . "Characterization of Borided DIN X165CrMoV12 Steel". El-Cezeri Journal of Science and Engineering 5 / 3 (Eylül 2018): 904-908. http://dx.doi.org/10.31202/ecjse.458766