Yıl 2018, Cilt 7, Sayı 1, Sayfalar 12 - 24 2018-04-15

Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti

Ferhat ÇIRA [1]

153 199

Asenkron makinalar, endüstride çok yaygın kullanılmakta ve önemli bir rol oynamaktadır bu nedenle güvenilir ve emniyetli çalışması kullanıcılar açısından çok önemlidir. Genellikle güvenlidirler ancak zamanla yıpranmaktadırlar. Asenkron makinaların arızaları sistemde aşırı kesintilere neden olabilir ve bu kesintiler sonucu büyük ekonomik kayıplara neden olabilirler. Bu durum asenkron makine durumunun sürekli olarak izlenmesine ve incelemesine motive etmektedir. Gerçek zamanlı durum izleme, beklenmedik arızaları ve bakım maliyetlerini azaltmak amacıyla arızaları tespit etmek için bir makina çalışırken ölçümler yapmayı ifade etmektedir. Bu çalışmada, asenkron makinaların gerçek zamanlı arıza tespiti ve teşhisinde kullanılan yöntemler incelenmekte ve gelecekteki araştırma alanları tanımlamaktadır.

Asenkron motorlar, Gerçek Zamanlı Arıza Tespiti, Sinyal İşleme, Sinir Ağları
  • Arthur, N., and J. Penman. 1998. “Condition Monitoring with Non-Linear Signal Processing.” In IEE Colloquium on Non-Linear Signal and Image Processing, 1998:4–4. IEE. https://doi.org/10.1049/ic:19980439.
  • Bellini, Alberto, Fiorenzo Filippetti, Giovanni Franceschini, Carla Tassoni, and Gerald B. Kliman. 2001. “Quantitative Evaluation of Induction Motor Broken Bars by Means of Electrical Signature Analysis.” IEEE Transactions on Industry Applications 37 (5):1248–55. https://doi.org/10.1109/28.952499.
  • Burges, CJC Christopher J C. 1998. “A Tutorial on Support Vector Machines for Pattern Recognition.” Data Mining and Knowledge Discovery 2 (2):121–67. https://doi.org/10.1023/A:1009715923555.
  • Cabanas, M. F., F. Pedrayes, M. G. Melero, C. H. Rojas G. A. Orcajo, J. M. Cano, and J. G. Norniella. 2011. “Insulation Fault Diagnosis in High Voltage Power Transformers By Means of Leakage Flux Analysis.” Progress In Electromagnetics Research 114 (January):211–34. https://doi.org/10.2528/PIER11010302.
  • Chow, M.-Y., R.N. Sharpe, and J.C. Hung. 1993. “On the Application and Design of Artificial Neural Networks for Motor Fault Detection. II.” IEEE Transactions on Industrial Electronics 40 (2):189–96. https://doi.org/10.1109/41.222640.
  • Cira, F., M. Arkan, and B. Gumus. 2016. “Detection of Stator Winding Inter-Turn Short Circuit Faults in Permanent Magnet Synchronous Motors and Automatic Classification of Fault Severity via a Pattern Recognition System.” Journal of Electrical Engineering and Technology 11 (2). https://doi.org/10.5370/JEET.2016.11.2.416.
  • Cira, Ferhat, Muslum Arkan, Bilal Gumus, and Taner Goktas. 2016. “Analysis of Stator Inter-Turn Short-Circuit Fault Signatures for Inverter-Fed Permanent Magnet Synchronous Motors.” In IECON 2016 - 42nd Annual Conference of the IEEE Industrial Electronics Society, 1453–57. IEEE. https://doi.org/10.1109/IECON.2016.7793717.
  • Cruz, Sergio M A, and A. J. Marques Cardoso. 2001. “Stator Winding Fault Diagnosis in Three-Phase Synchronous and Asynchronous Motors, by the Extended Park’s Vector Approach.” IEEE Transactions on Industry Applications 37 (5):1227–33. https://doi.org/10.1109/28.952496.
  • Donnell, P. O., C. Heising, C. Singh, and S. J. Wells. 1987. “Report of Large Motor Reliability Survey of Industrial and Commercial Installations: Part 3.” IEEE Transactions on Industry Applications IA-23 (1):153–58. https://doi.org/10.1109/TIA.1987.4504880.
  • Dorrell, D.G., W.T. Thomson, and S. Roach. n.d. “Analysis of Airgap Flux, Current and Vibration Signals as a Function of the Combination of Static and Dynamic Airgap Eccentricity in 3-Phase Induction Motors.” In IAS ’95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting, 1:563–70. IEEE. Accessed October 29, 2017. https://doi.org/10.1109/IAS.1995.530349.
  • El, Mohamed, and Hachemi Benbouzid. 2000. “A Review of Induction Motors Signature Analysis as a Medium for Faults Detection.” IEEE TRANSACTIONS ON INDUSTRIAL ELECTRONICS 47 (5).
  • Filippetti, F., G. Franceschini, C. Tassoni, and P. Vas. 2000. “Recent Developments of Induction Motor Drives Fault Diagnosis Using AI Techniques.” IEEE Transactions on Industrial Electronics 47 (5):994–1004. https://doi.org/10.1109/41.873207.
  • Filippetti, F., M. Martelli, G. Franceschini, and C. Tassoni. 1992. “Development of Expert System Knowledge Base to on-Line Diagnosis of Rotor Electrical Faults of Induction Motors.” In Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), 1992–Janua:92–99. https://doi.org/10.1109/IAS.1992.244459.
  • Filippetti, Fiorenzo, Giovanni Franceschini, Carla Tassoni, and Peter Vas. 2000. “Recent Developments of Induction Motor Drives Fault Diagnosis Using AI Techniques.” IEEE Transactions on Industrial Electronics 47 (5):994–1004. https://doi.org/10.1109/41.873207.
  • Finley, W.R., M.M. Hodowanec, and W.G. Holter. 2000. “An Analytical Approach to Solving Motor Vibration Problems.” IEEE Transactions on Industry Applications 36 (5):217–32. https://doi.org/10.1109/28.871297.
  • Fiser, R., and S. Ferkolj. 2001. “Application of a Finite Element Method to Predict Damaged Induction Motor Performance.” IEEE Transactions on Magnetics 37 (5):3635–39. https://doi.org/10.1109/20.952679.
  • Gaeid, Khalaf Salloum, Hew Wooi Ping, Mustafa Khalid, and Lauy Salih. 2011. “Fault Diagnosis, Induction Motor, Unbalance Voltage, Broken Rotor Bar, MCSA, FFT, Vector Control; Fault Diagnosis, Induction Motor, Unbalance Voltage, Broken Rotor Bar, MCSA, FFT, Vector Control.” Electrical and Electronic Engineering 1 (2):85–92. https://doi.org/10.5923/j.eee.20110102.14.
  • Haji, M., and H. Toliyat. 2001. “Pattern Recognition—-A Technique for Induction Machines Rotor Broken Bar Detection.” IEEE Power Engineering Review. https://doi.org/10.1109/MPER.2001.4311225.
  • Hatzipantelis, E., and J. Penman. 1993. “The Use of Hidden Markov Models for Condition Monitoring Electrical Machines.” In Electrical Machines and Drives, 1993. Sixth International Conference on (Conf. Publ. No. 376), 91–96.
  • Joksimovic, G.M., and J. Penman. 2000. “The Detection of Inter-Turn Short Circuits in the Stator Windings of Operating Motors.” IEEE Transactions on Industrial Electronics 47 (5):1078–84. https://doi.org/10.1109/41.873216.
  • Kim, K -H., B -G. Gu, and I -S. Jung. 2011. “Online Fault-Detecting Scheme of an Inverter-Fed Permanent Magnet Synchronous Motor under Stator Winding Shorted Turn and Inverter Switch Open.” IET ELECTRIC POWER APPLICATIONS 5 (6):529–39. https://doi.org/10.1049/iet-epa.2010.0272.
  • Kliman, G. B., and J. Stein. 1992. “Methods of Motor Current Signature Analysis.” Electric Machines and Power Systems 20 (5):463–74. https://doi.org/10.1080/07313569208909609.
  • Kliman, G.B., W.J. Premerlani, R.A. Koegl, and D. Hoeweler. 1996. “A New Approach to on-Line Turn Fault Detection in AC Motors.” IAS ’96. Conference Record of the 1996 IEEE Industry Applications Conference Thirty-First IAS Annual Meeting 1:687–93. http://ieeexplore.ieee.org/lpdocs/epic03/wrapper.htm?arnumber=557113.
  • Marques Cardoso, A. J., and E. S. Saraiva. 1992. “Predicting the Level of Air Gap Eccentricity in Operating Three-Phase Induction Motors, by Park’s Vector Approach.” In Conference Record - IAS Annual Meeting (IEEE Industry Applications Society), 1992–Janua:132–35. https://doi.org/10.1109/IAS.1992.244454.
  • Martin, B. 2003. Mechanical Signature Analysis. Adelaide: School of Mechanical Engineering Lecture Notes.
  • McCormick, a.C., and a.K. Nandi. 1998. “Cyclostationarity in Rotating Machine Vibrations.” Mechanical Systems and Signal Processing 12 (2):225–42. https://doi.org/10.1006/mssp.1997.0148.
  • Nandi, S., H.A. Toliyat, and X. Li. 2005. “Condition Monitoring and Fault Diagnosis of Electrical Motors—A Review.” IEEE Transactions on Energy Conversion 20 (4):719–29. https://doi.org/10.1109/TEC.2005.847955.
  • Nandi, Subhasis, Shehab Ahmed, and Hamid A. Toliyat. 2001. “Detection of Rotor Slot and Other Eccentricity Related Harmonics in a Three Phase Induction Motor with Different Rotor Cages.” IEEE Transactions on Energy Conversion 16 (3):253–60. https://doi.org/10.1109/60.937205.
  • Nandi, Subhasis, and Hamid A Toliyat. 1999. “Condition Monitoring and Fault Diagnosis of Electrical Machines -A Review.” {IEEE} Ind. Appl. Society Annual Meeting. Palácios, Rodrigo H. Cunha, Ivan N. da Silva, Alessandro Goedtel, and Wagner F. Godoy. 2016. “A Novel Multi-Agent Approach to Identify Faults in Line Connected Three-Phase Induction Motors.” Applied Soft Computing 45:1–10. https://doi.org/10.1016/j.asoc.2016.04.018.
  • Payne, B, A Ball, and F Gu. 2002. “Detection and Diagnosis of Induction Motor Faults Using Statistical Measures.” International Journal of COMADEM 5 (2):5–19.
  • Riley, Caryn M., Brian K. Lin, Thomas G. Habetier, and Gerald B. Kliman. 1999. “Stator Current Harmonics and Their Causal Vibrations: A Preliminary Investigation of Sensorless Vibration Monitoring Applications.” IEEE Transactions on Industry Applications 35 (1):94–99. https://doi.org/10.1109/28.740850.
  • Schoen, R.R., and T.G. Habetler. 1995. “Effects of Time-Varying Loads on Rotor Fault Detection in Induction Machines.” IEEE Transactions on Industry Applications 31 (4):900–906. https://doi.org/10.1109/28.395302.
  • Shi, Pu, Zheng Chen, Yuriy Vagapov, and Zoubir Zouaoui. 2014. “A New Diagnosis of Broken Rotor Bar Fault Extent in Three Phase Squirrel Cage Induction Motor.” Mechanical Systems and Signal Processing 42 (1):388–403. https://doi.org/10.1016/j.ymssp.2013.09.002.
  • Stavrou, Andreas, Howard G. Sedding, and James Penman. 2001. “Current Monitoring for Detecting Inter-Turn Short Circuits in Induction Motors.” IEEE Transactions on Energy Conversion 16 (1):32–37. https://doi.org/10.1109/60.911400.
  • Stone, G., and J. Kapler. 1998. “Stator Winding Monitoring.” IEEE Industry Applications Magazine 4 (5):15–20. https://doi.org/10.1109/2943.715501.
  • Styvaktakis, E., M.H.J. Bollen, and I.Y.H. Gu. 2001. “Expert System for Voltage Dip Classification and Analysis.” In 2001 Power Engineering Society Summer Meeting. Conference Proceedings (Cat. No.01CH37262), 671–76 vol.1. https://doi.org/10.1109/PESS.2001.970122.
  • Thomson, W.T. 1994. “On-Line Current Monitoring to Detect Electrical and Mechanical Faults in Three-Phase Induction Motor Drives.” In International Conference on Life Management of Power Plants, 1994:66–73. IEE. https://doi.org/10.1049/cp:19941096.
  • Thomson, W.T., and M. Fenger. 2001. “Current Signature Analysis to Detect Induction Motor Faults.” IEEE Industry Applications Magazine 7 (4):26–34. https://doi.org/10.1109/2943.930988.
  • Thorsen, Olav Vaag, and Magnus Dalva. 1999. “Failure Identification and Analysis for High-Voltage Induction Motors in the Petrochemical Industry.” IEEE Transactions on Industry Applications 35 (4):810–18. https://doi.org/10.1109/28.777188.
  • Trutt, F.C., J. Sottile, and J.L. Kohler. 2002. “Online Condition Monitoring of Induction Motors.” IEEE Transactions on Industry Applications 38 (6):1627–32. https://doi.org/10.1109/TIA.2002.804758.
  • Trutt, Frederick C., Joseph Sottile, and Jeffery L. Kohler. 2002. “Online Condition Monitoring of Induction Motors.” IEEE Transactions on Industry Applications 38 (6):1627–32. https://doi.org/10.1109/TIA.2002.804758.
  • Trzynadlowski, Andrzej M., and Ewen Ritchie. 2000. “Comparative Investigation of Diagnostic Media for Induction Motors: A Case of Rotor Cage Faults.” IEEE Transactions on Industrial Electronics 47 (5):1092–99. https://doi.org/10.1109/41.873218.
  • Vas, Peter. 1993. Parameter Estimation, Condition Monitoring, and Diagnosis of Electrical Machines. Oxford: Clarendon Press.
  • Wieser, Rudolf, Christian Kral, Franz Pirker, and Matthias Schagginger. 1999. “On-Line Rotor Cage Monitoring of Inverter-Fed Induction Machines by Means of an Improved Method.” IEEE Transactions on Power Electronics 14 (5):858–65. https://doi.org/10.1109/63.788482.
  • Wu, Qing, and Subhasis Nandi. 2010. “Fast Single-Turn Sensitive Stator Interturn Fault Detection of Induction Machines Based on Positive- and Negative-Sequence Third Harmonic Components of Line Currents.” In IEEE Transactions on Industry Applications, 46:974–83. https://doi.org/10.1109/TIA.2010.2045329.
  • Yazici, Birsen, and Gerald B. Kliman. 1999. “An Adaptive Statistical Time-Frequency Method for Detection of Broken Bars and Bearing Faults in Motors Using Stator Current.” IEEE Transactions on Industry Applications 35 (2):442–52. https://doi.org/10.1109/28.753640.
Konular Mühendislik
Dergi Bölümü Derleme Makaleler
Yazarlar

Yazar: Ferhat ÇIRA (Sorumlu Yazar)
Ülke: Turkey


Bibtex @araştırma makalesi { gbad364024, journal = {Gaziosmanpaşa Bilimsel Araştırma Dergisi}, issn = {2146-8168}, eissn = {2146-8168}, address = {Gaziosmanpaşa Üniversitesi}, year = {2018}, volume = {7}, pages = {12 - 24}, doi = {}, title = {Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti}, key = {cite}, author = {ÇIRA, Ferhat} }
APA ÇIRA, F . (2018). Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti. Gaziosmanpaşa Bilimsel Araştırma Dergisi, 7 (1), 12-24. Retrieved from http://dergipark.gov.tr/gbad/issue/34849/364024
MLA ÇIRA, F . "Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti". Gaziosmanpaşa Bilimsel Araştırma Dergisi 7 (2018): 12-24 <http://dergipark.gov.tr/gbad/issue/34849/364024>
Chicago ÇIRA, F . "Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti". Gaziosmanpaşa Bilimsel Araştırma Dergisi 7 (2018): 12-24
RIS TY - JOUR T1 - Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti AU - Ferhat ÇIRA Y1 - 2018 PY - 2018 N1 - DO - T2 - Gaziosmanpaşa Bilimsel Araştırma Dergisi JF - Journal JO - JOR SP - 12 EP - 24 VL - 7 IS - 1 SN - 2146-8168-2146-8168 M3 - UR - Y2 - 2018 ER -
EndNote %0 Gaziosmanpaşa Bilimsel Araştırma Dergisi Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti %A Ferhat ÇIRA %T Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti %D 2018 %J Gaziosmanpaşa Bilimsel Araştırma Dergisi %P 2146-8168-2146-8168 %V 7 %N 1 %R %U
ISNAD ÇIRA, Ferhat . "Asenkron Motorlarda Gerçek Zamanlı Durum İzleme ve Arıza Tespiti". Gaziosmanpaşa Bilimsel Araştırma Dergisi 7 / 1 (Nisan 2018): 12-24.