Yıl 2018, Cilt 2, Sayı 3, Sayfalar 36 - 41 2018-09-30

Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions

Özgür Özdilli [1] , M. Emin Erdin [2]

36 37

In this study, it is aimed to make comparison of four different steel sheet materials that are widely used in deep drawing applications by taking blank holder force and friction conditions into account. Comparison is made between a standard steel which is generally used in white goods manufacturing (DC01), an ultralow carbon steel (DC04), a deep drawing steel suitable for cold forming (DD13) and an extra deep drawing steel resistant to ageing (DD14), which are preferred when manufacturing a part by deep drawing, if there is not any special material requirements. The purpose of this study is to make selection between these mentioned materials easier. Simufact.forming, a plastic deformation analysis software based on finite element method, and material database of the software was used in the conducted analyzes. Various blank holder forces were applied and friction conditions were changed for each material. By investigating obtained results, it was seen that there is a significant difference between deep drawing behavior of these materials and DD14 has high deep drawability even under high blank holder forces with low energy. Moreover, it was observed that friction conditions have a significant influence on effectiveness of deep drawing process.

Deep Drawing, Steel Sheet, Drawing Ratio, Blank Holder Force, Coefficient of Fric-tion, Finite Element Analysis
  • Groover, M.P., (2016). Fundamentals of modern manufac-turing: materials, processes, and systems, Sixth ed. John Wiley & Sons, Inc., Hoboken, NJ.
  • Vahdat, V., Santhanam, S., Chun, Y.W., (2006). A numeri-cal investigation on the use of drawbeads to minimize ear formation in deep drawing. J Mater Process Tech 176.
  • Yagami, T., Manabe, K., Yamauchi, Y., (2007). Effect of alternating blank holder motion of drawing and wrinkle elim-ination on deep-drawability. J Mater Process Tech 187, 187-191.
  • Chengzhi, S., Guanlong, C., Zhongqin, L., (2005). Deter-mining the optimum variable blank-holder forces using adap-tive response surface methodology (ARSM). Int J Adv Man-uf Tech 26, 23-29.
  • Kitayama, S., Natsume, S., Yamazaki, K., Han, J., Uchida, H., (2016). Numerical investigation and optimization of pul-sating and variable blank holder force for identification of formability window for deep drawing of cylindrical cup. Int J Adv Manuf Tech 82, 583-593.
  • Anonymous, (2017). Erdemir Sheet Metal Catalog. Ereğli Iron and Steel Factory.
  • MSC Software Corporation, (2015). Simufact.forming 14.0, Izmir.
Birincil Dil en
Konular Mühendislik, Makine
Dergi Bölümü Volumes
Yazarlar

Yazar: Özgür Özdilli (Sorumlu Yazar)
Kurum: HITIT UNIVERSITY
Ülke: Turkey


Yazar: M. Emin Erdin
Kurum: HITIT UNIVERSITY
Ülke: Turkey


Bibtex @araştırma makalesi { ijastech463629, journal = {International Journal of Automotive Science and Technology}, issn = {}, eissn = {2587-0963}, address = {Otomotiv Mühendisleri Derneği}, year = {2018}, volume = {2}, pages = {36 - 41}, doi = {10.30939/ijastech..463629}, title = {Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions}, key = {cite}, author = {Özdilli, Özgür and Erdin, M. Emin} }
APA Özdilli, Ö , Erdin, M . (2018). Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions. International Journal of Automotive Science and Technology, 2 (3), 36-41. DOI: 10.30939/ijastech..463629
MLA Özdilli, Ö , Erdin, M . "Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions". International Journal of Automotive Science and Technology 2 (2018): 36-41 <http://dergipark.gov.tr/ijastech/issue/39477/463629>
Chicago Özdilli, Ö , Erdin, M . "Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions". International Journal of Automotive Science and Technology 2 (2018): 36-41
RIS TY - JOUR T1 - Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions AU - Özgür Özdilli , M. Emin Erdin Y1 - 2018 PY - 2018 N1 - doi: 10.30939/ijastech..463629 DO - 10.30939/ijastech..463629 T2 - International Journal of Automotive Science and Technology JF - Journal JO - JOR SP - 36 EP - 41 VL - 2 IS - 3 SN - -2587-0963 M3 - doi: 10.30939/ijastech..463629 UR - http://dx.doi.org/10.30939/ijastech..463629 Y2 - 2018 ER -
EndNote %0 International Journal of Automotive Science and Technology Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions %A Özgür Özdilli , M. Emin Erdin %T Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions %D 2018 %J International Journal of Automotive Science and Technology %P -2587-0963 %V 2 %N 3 %R doi: 10.30939/ijastech..463629 %U 10.30939/ijastech..463629
ISNAD Özdilli, Özgür , Erdin, M. Emin . "Comparison of Common Deep Drawing Steel Sheets in terms of Blank Holder Force and Friction Conditions". International Journal of Automotive Science and Technology 2 / 3 (Eylül 2018): 36-41. http://dx.doi.org/10.30939/ijastech..463629