The following is the editorial workflow that every manuscript submitted to the journal undergoes during the course of the peer-review process.
The entire editorial workflow is performed using the Dergipark Online Manuscript Tracking System. Once a manuscript is submitted for publication, the manuscript is checked by the journal’s editorial office to ensure that it is suitable to go through the normal peer review process. Once this is done, the manuscript is sent to an appropriate Editor based on the subject of the manuscript and the availability of the Editors.
If the Editor finds that the manuscript may not be of sufficient quality to go through the normal peer review process, or that the subject of the manuscript may not be appropriate for the journal’s scope, the manuscript shall be rejected with no further processing.
As part of the submission process, authors are required to check off their submission’s compliance with all of the following items, and submissions may be returned to authors that do not adhere to these guidelines. Please read and follow these instructions carefully; doing so will ensure that the publication of your manuscript is as rapid and efficient as possible. The Publisher reserves the right to return manuscripts that are not prepared in accordance with these instructions.
The submission has not been previously published, nor is it before another journal for consideration (or an explanation has been provided in Comments to the Editor).
All IJEGEO articles are published with open access under the CC-BY Creative Commons attribution license (the current version is CC-BY, version 4.0 http://creativecommons.org/licenses/by/4.0/). This means that the author(s) retain copyright, but the content is free to download, distribute and adapt for commercial or non-commercial purposes, given appropriate attribution to the original article.
The use of general descriptive names, trade names, trademarks, and so forth in this publication, even if not specifically identified, does not imply that these names are not protected by the relevant laws and regulations. The submitting author is responsible for securing any permissions needed for the reuse of copyrighted materials included in the manuscript.
While the advice and information in this journal are believed to be true and accurate on the date of its going to press, neither the authors, the editors, nor the publisher can accept any legal responsibility for any errors or omissions that may be made. The publisher makes no warranty, express or implied, with respect to the material contained herein.
You are free to:
Share — copy and redistribute the material in any medium or format
Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Under the following conditions:
Attribution — You must give appropriate credit, provide a link to the licence, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licenser endorses you or your use.
No additional restrictions — You may not apply legal terms or technological measures that legally restrict others from doing anything the licence permits.
The licenser cannot revoke these freedoms as long as you follow the licence terms.
You do not have to comply with the licence for elements of the material in the public domain or where your use is permitted by an applicable exception or limitation.
No warranties are given. The licence may not give you all of the permissions necessary for your intended use. For example, other rights such as publicity, privacy, or moral rights may limit how you use the material.
The CC BY License, of which 4.0 is the recent version, was developed to facilitate open access – namely, free immediate access to, and unrestricted reuse of, original works of all types.
Under this liberal licence, authors agree to make articles legally available for reuse, without permission or fees, for virtually any purpose. Anyone may copy, distribute, or reuse these articles, as long as the author and original source are properly cited. Thus, CC BY facilitates the dissemination, transfer, and growth of scientific knowledge.
Please read the full legal code of this licence.
One set of proofs will be sent to the corresponding author as given on the title page of the manuscript. Only typesetter's errors may be corrected; no changes in, or additions to, the edited manuscript will be allowed. Subsequent corrections will not be possible, so please ensure your first sending is complete.
SUBMISSION OF MANUSCRIPTS:
- The complete manuscript should contain full text, figures, tables and references. MS word document with file extension ".doc" or ".docx" is preferred.
- All manuscripts will be peer-reviewed by at least two referees.
PREPARATION OF MANUSCRIPTS:
- The text should be in single-column format. Keep the layout of the text as simple as possible.
- Type the manuscript's text single-spaced, justified and with 20 mm margins, including References, Tables, Figure, on B5 (JIS) (182x257 mm) paper format using a Word, Times New Roman.
Organize your manuscript as follows:
The title page should include:
· A concise and informative title: Should be no more than 20 words
Title (Times New Roman-13 pt)
· Full name(s) of the author(s), corresponding author should be indicated with asterisk (*)
Authors (Times New Roman-11 pt)
· The affiliation(s) and address(es) of the author(s)
1 Address. (Times New Roman-8 pt)
2 Address. (Times NewRoman-8 pt) The e-mail address, telephone and fax numbers of the corresponding author
Abstract font size should be 9pt.
Abstract should not exceed 300 words and should not contain any undefined abbreviations or unspecified references
Font size should be 9pt. Three to six key words should be listed below the abstract.
Text is usually divided into following sections:
2. Materials and Methods
4. Discussion and Conclusion
Titles and text font size should be 10 pt
If there are subtitles font size should be 10 pt and italic
Tables and Figures should be cited in the text and they should follow the text; see below for details.
- All references should be cited in the text.
- Cite references in the text as Author (year) or (Author, year).
- If there are two authors in the references: Author and Author (year) or (Author and Author, year);
- If there are more authors in the references: Author et al. (year) or (Author et al., year); More than one reference in the same sentence: (Author, year; Author, year).
- References from the same author(s) in the same year should be identified by the letters "a", "b", "c", etc., placed after the year of publication.
- Literature quoted in the text must be listed in alphabetical order of first author’s surname at the end of each manuscript.
- References in languages other than English must be referred to by an English translation (with the original language indicated in parentheses).
• Article in Journal:
Ackerman, D., Weisberg, S.B. 2003. Relationship between rainfall and beach bacterial concentrations on Santa Monica Bay Beaches. Journal of Water Health, 1 (2), 85-90.
• Book chapter:
Cupples, A.M., Xagorarki, I., Rose, J. 2010. New molecular methods for detection of woterbone pathogens. In: Mitchell, R., Gu, J.D. (Eds), Environmental Microbiology, Wiley-Blackwell, New Jersey, 150-211.
Hagedorn, C., Blanch, A.R., Harwood, V.J. 2011. Microbial Source Tracking: Methods, Applications, and Case Studies. Springer, New York.
Zeki, S. 2012. Assessing microbial water quality by membrane filtration and quantitative polymerase chain reaction (qPCR) methods at Golden Horn. PhD Thesis. Istanbul University, Istanbul, Turkey.
• Institutional Web Pages:
FAO, 2008. Information on fisheries management in Bulgaria and Romania. http://www.fao.org/fi/fcp/en/ROM/body.htm (Accessed 26 June 2013).
Number tables consecutively in Arabic numerals (1, 2, 3, ...). Title of the table should be written on top of the table. Descriptions about table items should be placed at the bottom of the table with an asterisk.
Table 1. Table title font size should be 10 pt. (Single line)
Number Figures consecutively in Arabic numerals (1, 2, 3, ...), and type each Figure on a separate sheet. Title of the figure and descriptions about figure items should be written on bottom of the figure
Figure 1. Figure caption font size will be 10 pt. (Single line). Submit each caption directly below each figure. Maximum figure width: 142 mm