Yıl 2008, Cilt , Sayı 2, Sayfalar 97 - 103 2008-07-01

Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed

Semin SANURİ [1] , Rosli Abu BAKAR [2] , Abdul Rahim ISMAIL [3] , Ismail ALI [4]

0 6

The objective of this paper is to presents the gas fl ow pressure profi le in the intake port of port injection compressed natural gas (CNG) engine spark ignition using GT-Power software for steady-state and transient simulation. The port injection CNG engine spark ignition computational model is developed from the real diesel engine data, where these data input to software window libraries. In this research, the simulation of engine computational model is running in variations engine speeds from 500, 1000, 1500, 2000, 2500, 3000, 3500 and 4000 rpm. The simulation output data is collected from the GT-Post post processing plots for static pressure versus crank angle and GT-Post post processing casesRLT for pressure in variations engine speeds. The simulation results are shown the characters in intake port pressure profi le of port injection CNG engine in variations engine speeds. The detail of intake port gas fl ow pressure profi le performance of port injection CNG engine is shown in graphs in this paper
Engine speed, intake port, port injection CNG engine, pressure profi le
  • [1] Challen, B., Baranescu, R. 2003. Diesel Engine Reference Book, Elsevier, Oxford, U.K.
  • [2] Ganesan, V. 1999. Internal Combustion Engines 2nd Edition. Tata McGraw-Hill, New Delhi, India.
  • [3] Heywood, J.B. 1998. Internal Combustion Engine Fundamentals. McGraw-Hill, Singapore.
  • [4] Poulton, M.L. 1994. Alternative Fuels for Road Vehicles. Computational Mechanics Publications, UK.
  • [5] Shasby, B.M. 2004. Alternative Fuels: Incompletely Addressing the Problems of the Automobile. MSc Thesis, Virginia Polytechnic Institute and State Univ., USA: 5-13.
  • [6] Semin., Bakar, R. A., Ismail, A. R. 2008. Steady-State and Transient Simulation of Gas Flow Pressure in Intake Port Engine. J. of Eng. and App. Sci.ences 3 (1): 47-54.
  • [7] Bakar, R.A., Semin., Ismail, A.R., Ali, I. 2007. Computational Modeling of Compressed Natural Gas as an Alternative Fuel for Diesel Engines, 2nd ANGVA Conference, November 27-29, Bangkok, Thailand.
  • [8] Cho, H. M., He, Bang-Quan. 2007. Spark Ignition Natural Gas Engines—A review, Energy Conversion and Management 48: 608–618.
  • [9] Czerwinski J., Comte P., Janach.W., Zuber P. 1999. Sequential Multipoint Trans-Valve-Injection for Natural Gas Engines. SAE Technical Paper 1999-01-0565.
  • [10] Kato, K., Igarashi, K., Masuda, M., Otsubo, K., Yasuda, A., Takeda, K., Sato, T. 1999. Development of Engine for Natural Gas Vehicle. SAE Paper 1999-01-0574.
  • [11] Klein, M., Eriksson., N. 2002. Compression Estimation from Simulated and Measured Cylinder Pressure. SAE Paper 2002-01-0843.
  • [12] Sera, M.A., Bakar, R.A., Leong, S. 2003. CNG Engine Performance Improvement Strategy through Advanced Intake System, SAE Paper 2003-01-1937.
  • [13] Blair, G.P. 1999. Design and Simulation of Four Stroke Engines, SAE Inc. USA.
  • [14] Bakar, R.A., Idris, A., Semin. 2007. An Overview of Compressed Natural Gas as Alternative Fuel for Internal Combustion Engines. MARINE Vol.4 (2).
  • [15] Bakar, R.A., Semin., Ismail, A.R. 2007. The Internal Combustion Engine Diversifi cation Technology And Fuel Research for the Future: A Review, Proceeding of AEESEAP Symposium, Kuala Lumpur, Malaysia: 57- 62.
  • [16] Hollnagel, C., Borges, L.H., Muraro, W. 1999. Combustion Development of the Mercedes-Benz MY1999 CNGEngine M366LAG, SAE Paper 1999-01-3519.
  • [17] Shashikantha., Parikh P.P. 1999. Spark Ignition Producer Gas Engine and Dedicated Compressed Natural Gas Engine-Technology Development and Experimental Performance Optimization. SAE Paper 1999-01-3515.
  • [18] Jawad, B., Dragoiu, A. 2003. Intake Design for Maximum Performance. SAE Paper 2003-01-2277.
  • [19] Ismail, A.R., Semin., Bakar, R.A. 2007. Valve Flow Discharge Coeffi cient Investigation for Intake and Exhaust Port of Four Stroke Diesel Engines, Journal of Engineering and Applied Sciences Vol. 2 (12): 1807- 1811.
  • [20] Semin., Ismail, A.R., Bakar, R.A. 2007. In An Engine Valve Lift Visualization and Simulation Performance Using CFD. Proceeding of CADME, Malaysia.
  • [21] Semin., Bakar, R.A., Ismail, A.R. 2007. Air Flow Analysis of Four Stroke Direct Injection Diesel Engines Based on Air Pressure Input and L/D Ratio. Research Journal of Applied Sciences Vol. 2 (11), pp: 1135-1142.
  • [22] Semin., Bakar, R.A., 2007. Nozzle Holes Effect on Unburned Fuel in Injected and In-Cylinder Fuel of Four Stroke Direct Injection Diesel Engine, Research Journal of Applied Sciences Vol. 2 (11): 1165-1169.
  • [23] Semin., Bakar, R.A., Ismail, A.R. 2007. Engine Power Calculation using Air Flow through Engine from Flowbench Test Flow of Four Stroke DI Diesel Engines. J. Eng. and App. Sciences Vol. 2 (12): 1812-1817.
  • [24] Gamma Technologies. 2003. GT-POWER Manual, Gamma Technologies, Inc.
  • [25] Kowalewicz, A. 1984. Combustion System of HighSpeed Piston I.C. Engines. Wydawnictwa Komunikacji i Lacznosci, Warszawa.
  • [26] Piedrahita, C.A.R., Riaza, H.F.Q. 2003. Prediction of In-Cylinder Pressure, Temperature and Loads Related to the Crank-Slider Mechanism of I. C. Engines: A Computational Model. SAE Paper 2003-01-0728
Konular
Diğer ID JA75SU72GG
Dergi Bölümü Araştırma Makalesi
Yazarlar

Yazar: Semin SANURİ
Kurum: University Malaysia Pahang, Locked Bag 12, 25000 Kuantan, Pahang, Malaysia

Yazar: Rosli Abu BAKAR
Kurum: University Malaysia Pahang, Locked Bag 12, 25000 Kuantan, Pahang, Malaysia

Yazar: Abdul Rahim ISMAIL
Kurum: University Malaysia Pahang, Locked Bag 12, 25000 Kuantan, Pahang, Malaysia

Yazar: Ismail ALI
Kurum: University Malaysia Pahang, Locked Bag 12, 25000 Kuantan, Pahang, Malaysia

Bibtex @ { ijnes507952, journal = {Uluslararası Doğa ve Mühendislik Bilimleri Dergisi}, issn = {}, eissn = {2146-0086}, address = {Nobel Bilim ve Araştırma Merkezi Limited}, year = {2008}, volume = {}, pages = {97 - 103}, doi = {}, title = {Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed}, key = {cite}, author = {SANURİ, Semin and BAKAR, Rosli Abu and ALI, Ismail and ISMAIL, Abdul Rahim} }
APA SANURİ, S , BAKAR, R , ISMAIL, A , ALI, I . (2008). Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed. Uluslararası Doğa ve Mühendislik Bilimleri Dergisi, (2), 97-103. Retrieved from http://dergipark.gov.tr/ijnes/issue/42220/507952
MLA SANURİ, S , BAKAR, R , ISMAIL, A , ALI, I . "Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed". Uluslararası Doğa ve Mühendislik Bilimleri Dergisi (2008): 97-103 <http://dergipark.gov.tr/ijnes/issue/42220/507952>
Chicago SANURİ, S , BAKAR, R , ISMAIL, A , ALI, I . "Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed". Uluslararası Doğa ve Mühendislik Bilimleri Dergisi (2008): 97-103
RIS TY - JOUR T1 - Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed AU - Semin SANURİ , Rosli Abu BAKAR , Abdul Rahim ISMAIL , Ismail ALI Y1 - 2008 PY - 2008 N1 - DO - T2 - Uluslararası Doğa ve Mühendislik Bilimleri Dergisi JF - Journal JO - JOR SP - 97 EP - 103 VL - IS - 2 SN - -2146-0086 M3 - UR - Y2 - 2019 ER -
EndNote %0 Uluslararası Doğa ve Mühendislik Bilimleri Dergisi Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed %A Semin SANURİ , Rosli Abu BAKAR , Abdul Rahim ISMAIL , Ismail ALI %T Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed %D 2008 %J Uluslararası Doğa ve Mühendislik Bilimleri Dergisi %P -2146-0086 %V %N 2 %R %U
ISNAD SANURİ, Semin , BAKAR, Rosli Abu , ISMAIL, Abdul Rahim , ALI, Ismail . "Intake Port Gas Flow Pressure Profi le Investigation of Port Injection Compressed Natural Gas (CNG) Engine Based on Engine Speed". Uluslararası Doğa ve Mühendislik Bilimleri Dergisi / 2 (Temmuz 2008): 97-103.