Cilt 3, Sayı 1, Sayfalar 25 - 34

An extraordinary Ti alloy named Gum Metal with composition Ti-12Ta-9Nb-3V-6Zr-O and Ti-23Nb-0.7Ta-2Zr-O (mole %) has significant mechanical properties including superelasticity, superplasticity, very high yield and tensile stresses as well as the invar and elinvar behaviors. Gum metal was investigated in this study by means of structural analysis. It was tried to be obtained by suction casting in the argon atmosphere instead of powder metallurgy. Stability of the phases and the effect of the oxygen and the cold work on the properties of the Gum Metal were discussed. 

gum metal,ti alloy
  • [1] Kuroda, D., Niinomi, M., Morinaga, M., Kato, Y., & Yashiro, T. (1998). Design and mechanical properties of new β type titanium alloys for implant materials. Materi- als Science and Engineering: A, 243(1-2), 244-249. doi:10.1016/s0921-5093(97)00808-3
  • [2] Wang, Y., Dai, S., Chen, F., Yu, X., & Zhang, Y. (2013). Design, strength prediction of Ti35NbxSnyZrzMo alloys with low elastic moduli and experimental verification on their mechanical properties. Rare Metals Rare Met., 33(6), 657-662. doi:10.1007/s12598-013-0145-7
  • [3] Saito, T. T.Furuta, J.H.Hwang, S.Kuramoto, K.Nishino, N.Suzuki, R.Chen,A.Yamada, .Ito,Y.Seno,T.Nonaka, H.Ikehata, N.Nagasako, .Iwamoto,Y.Ikuhara,T.Sakuma (2003). Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deforma- tion Mechanism. Science, 464-467.
  • [4] González, M., Peña, J., Manero, J. M., Arciniegas, M., & Gil, F. J. (2009). Design and Characterization of New Ti-Nb-Hf Alloys. J. of Materi Eng and Perform Journal of Materials Engineering and Performance, 18(5-6), 490- 495. doi:10.1007/s11665-009-9381-2
  • [5] Boyer, R. (1994). Materials properties handbook titanium alloys. Materials Park, OH: ASM International.
  • [6] ASM Material Data Sheet. (n.d.). Retrieved May 22, 2016, from http://asm.matweb.com/search/SpecificMaterial.asp?bass num=MTP641
  • [7] Guo, W., Quadir, M., Moricca, S., Eddows, T., & Ferry, M. (26 March 2013). Microstructural evolution and final properties of a cold-swaged multifunctional Ti– Nb–Ta–Zr–O alloy produced by a powder metallurgy route. Materials Science and Engineering: A, 206-216.
  • [8] Besse, M., Castany, P., & Gloriant, T. (2011). Mecha- nisms of deformation in gum metal TNTZ-O and TNTZ titanium alloys: A comparative study on the oxygen influence. Acta Materialia, 59(15), 5982-5988.
  • [9] Furuta, T., Kuramoto, S., Morris, J., Nagasako, N., Withey, E., & Chrzan, D. (2013). The mechanism of strength and deformation in Gum Metal. Scripta Materia- lia, 68(10), 767-772.
  • [10] Gutkin, M. Y., Ishizaki, T., Kuramoto, S., & Ovid’Ko, I. A. (2006). Nanodisturbances in deformed Gum Metal. Acta Materialia, 54(9), 2489-2499.
  • [11] Gutkin, M., Ishizaki, T., Kuramoto, S., Ovid’Ko, I., & Skiba, N. (2008). Giant faults in deformed Gum Metal. International Journal of Plasticity, 24(8), 1333-1359.
  • [12] Nickel Alloys . NetEverything You Wanted To Know About Nickel Alloys. (n.d.). Retrieved May 26, 2016, from http://www.nickel- alloys.net/invar_nickel_iron_alloy.html
  • [13] The Nobel Prize in Physics 1920. (n.d.). Retrieved May 26, 2016, from http://www.nobelprize.org/nobel_prizes/physics/laureates /1920/
  • [14] Hou, F., Li, S., Hao, Y., & Yang, R. (2010). Nonli- near elastic deformation behaviour of Ti–30Nb–12Zr alloys. Scripta Materialia, 63(1), 54-57. doi:10.1016/j.scriptamat.2010.03.011
  • [15] Lai, M., Tasan, C., & Raabe, D. (2015). Deformation mechanism of ω-enriched Ti–Nb-based gum metal: Dislocation channeling and deformation induced ω–β transformation. Acta Materialia, 100, 290300. doi:10.1016/j.actamat.2015.08.047
  • [16] Baker, H. (1992). Alloy phase diagrams. Materials Park, OH: ASM International
Konular
Dergi Bölümü Articles
Yazarlar

Yazar: Yiğithan TUFAN
E-posta: journalmatter@gmail.com
Ülke: Turkey


Bibtex @araştırma makalesi { matter298820, journal = {Matter}, issn = {}, address = {Orta Doğu Teknik Üniversitesi}, year = {}, volume = {3}, pages = {25 - 34}, doi = {}, title = {STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL}, language = {en}, key = {cite}, author = {TUFAN, Yiğithan} }
APA TUFAN, Y . (). STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL. Matter, 3 (1), 25-34. Retrieved from http://dergipark.gov.tr/matter/issue/28120/298820
MLA TUFAN, Y . "STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL". Matter 3 (): 25-34 <http://dergipark.gov.tr/matter/issue/28120/298820>
Chicago TUFAN, Y . "STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL". Matter 3 (): 25-34
RIS TY - JOUR T1 - STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL AU - Yiğithan TUFAN Y1 - 2017 PY - 2017 N1 - DO - T2 - Matter JF - Journal JO - JOR SP - 25 EP - 34 VL - 3 IS - 1 SN - - M3 - UR - Y2 - 2017 ER -
EndNote %0 Matter STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL %A Yiğithan TUFAN %T STRUCTURAL AND MECHANICAL ANALYSIS OF A MULTIFUNCTIONAL TI ALLOY, GUM METAL %D 2017 %J Matter %P - %V 3 %N 1 %R %U