Yıl 2018, Cilt 4, Sayı 1, Sayfalar 64 - 73 2018-06-26

GERİ DÖNÜŞTÜRÜLMÜŞ VE DOĞAL MALZEME KULLANILARAK ÜRETİLEN SANDVİÇ KOMPOZİTLERİNİN EĞİLME DAVRANIŞLARI
FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL

H Ersen Balcıoğlu [1]

38 60

Son yıllarda, düşük maliyetli mühendislik malzemeleri üretebilmek için polimer malzemelerde takviye olarak doğal fiberler kullanımı üzerine ilgi artmaktadır. Sentetik malzemeler yerine doğal ürünlerin kullanılması atmosfere salınan karbon miktarını azaltmaktadır. Bununla birlikte, kullanılmış malzemelerin geri dönüştürülerek yeniden kullanılması hem çevre hem de ekonomik nedenlerden dolayı önemlidir.  Bu çalışmada, doğal ve geri dönüştürülmüş malzeme kullanılarak üretilen sandviç kompozitlerin eğilme davranışları incelenmiştir. Bu bağlamda, 3 farklı granül boyutu (1 mm, 2 mm ve 4 mm) ve üç farklı çekirdek kalınlığı (4 mm, 8 mm ve 12 mm) kullanılarak yapılan dokuz farklı çekirdek malzemesi kullanılmış taşıt lastiğinden imal edilmiştir. Daha sonra çekirdek malzemeler doğal jüt kumaş takviyeli tabakalı kompozitler ile birleştirilerek sandviç kompozitler üretildi. Üretilen sandviç kompozit malzemelerin yapı malzemesi olarak kullanılabilirliğini test etmek için, üç nokta eğilme yükü altında eğilme davranışları incelenmiştir. Test sonuçları, malzemenin eğilme davranışının, çekirdek malzemenin tanecik boyutuna ve kalınlığına göre değiştiğini göstermektedir.

Recently, for making the low-cost engineering materials the use of natural fibers as reinforcement in polymers composites has brought forth a lot of interest. The use of natural products instead of synthetic materials reduces the amount of carbon released into the atmosphere. Nevertheless, reuse of used materials by recycled is important both for the environment and for economic reasons. In this study, flexural behaviors of sandwich composites manufactured by using natural and recycled material were investigated. In this context, 9 different core materials, which were made by using 3 different granules size (1 mm, 2 mm and 4 mm) and 3 different core thickness (4 mm, 8 mm and 12 mm), were manufactured from waste vehicle tires. After, sandwich composites were produced by combining the core materials with natural jute fabric reinforced laminated composites. In order to test the usability of the produced sandwich composite materials as building material, the flexural behaviors of the sandwich composite were investigated under three-point bending load. Test results show that flexural behavior of the material varies according to the granular size and thickness of the core material.

  • [1] Elanchezhian, C. Ramnath, B. Ramakrishnan, V.G. Rajendrakumar, M. Naveenkumar, V. and Saravanakumar, M.K., “Review on mechanical properties of natural fiber composites.,” Mater. Today Proc., vol. 5, no. 1, pp. 1785–1790, 2018.
  • [2] Rajesh M. and Kanish, T., “Mechanical Properties of Natural Fiber Sandwich Composite: Effect of Core Layer,” Mech. Mater. Sci. Eng. MMSE J. Open Access, vol. 9, pp. 1–5, 2017.
  • [3] Torres, J. P. Vandi, L.-J. Veidt, M. and Heitzmann, M. T., “The mechanical properties of natural fibre composite laminates: A statistical study,” Compos. Part Appl. Sci. Manuf., vol. 98, pp. 99–104, Jul. 2017.
  • [4] A. Sailesh, R. Arunkumar, and S. Saravanan, “Mechanical Properties and Wear Properties of Kenaf – Aloe Vera – Jute Fiber Reinforced Natural Fiber Composites,” Mater. Today Proc., vol. 5, pp. 7184–7190, 2018.
  • [5] Rajesh M. andPitchaimani, J., “Mechanical Properties of Natural Fiber Braided Yarn Woven Composite: Comparison with Conventional Yarn Woven Composite,” J. Bionic Eng., vol. 14, no. 1, pp. 141–150, Jan. 2017.
  • [6] Wong, K. J. Zahi, S. Low, K. O. and Lim, C. C., “Fracture characterisation of short bamboo fibre reinforced polyester composites,” Mater. Des., vol. 31, no. 9, pp. 4147–4154, Oct. 2010.
  • [7] Campilho, R. D. S. G. Moura, D. C. Gonçalves, D. J. S. da Silva, J. F. M. G. Banea, M. D. and da Silva, L. F. M., “Fracture toughness determination of adhesive and co-cured joints in natural fibre composites,” Compos. Part B Eng., vol. 50, pp. 120–126, Jul. 2013.
  • [8] Czajczyńska, D. Krzyżyńska, R. Jouhara, H. and Spencer, N., “Use of pyrolytic gas from waste tire as a fuel: A review,” Energy, vol. 134, pp. 1121–1131, Sep. 2017.
  • [9] United States Environmental Protection Agenc, Scrap Tire Handbook on Recycling Management for US and Mexico. Washington, 2010.
  • [10] Sienkiewicz, M. Kucinska-Lipka, J. Janik, H. and Balas, A. “Progress in used tyres management in the European Union: A review,” Waste Manag., vol. 32, no. 10, pp. 1742–1751, Oct. 2012.
  • [11] Wimmer Z. and Zarevúcka, M., “A review on the effects of supercritical carbon dioxide on enzyme activity,” Int. J. Mol. Sci., vol. 11, no. 1, pp. 233–253, 2010.
  • [12] Vitale, J. P. Francucci, G. Xiong, J. and Stocchi, A., “Failure mode maps of natural and synthetic fiber reinforced composite sandwich panels,” Compos. Part Appl. Sci. Manuf., vol. 94, pp. 217–225, Mar. 2017.
  • [13] Mallaiah, S. Sharma, K. V. and Krishna, M., “Development and comparative studies of bio-based and synthetic fiber based sandwich structures,” Int J Soft Compos Eng, vol. 2, pp. 332–5, 2012.
  • [14] Sargianis, J. J. Kim, H.-I. Andres, E. and Suhr, J., “Sound and vibration damping characteristics in natural material-based sandwich composites,” Compos. Struct., vol. 96, pp. 538–544, Feb. 2013.
  • [15] Reis, L. Carvalho, P. Alves, C. and Freitas, M., “Mechanical Behaviour of Sandwich Beams Manufactured with Glass or Jute Fiber in Facings and Cork Agglomerates as Core,” Mater. Sci. Forum, vol. 636–637, pp. 245–252, Jan. 2010.
  • [16] Dweib, M. A. Hu, B. O’Donnell, A. Shenton, H. W. and Wool, R. P. , “All natural composite sandwich beams for structural applications,” Compos. Struct., vol. 63, no. 2, pp. 147–157, Feb. 2004.
  • [17] Petrone, G. Rao, S. De Rosa, S. Mace, B. R. Franco, F. and Bhattacharyya, D., “Initial experimental investigations on natural fibre reinforced honeycomb core panels,” Compos. Part B Eng., vol. 55, pp. 400–406, Dec. 2013.
  • [18] Du, Y. Yan, N. and Kortschot, M. T., “Light-weight honeycomb core sandwich panels containing biofiber-reinforced thermoset polymer composite skins: Fabrication and evaluation,” Compos. Part B Eng., vol. 43, no. 7, pp. 2875–2882, Oct. 2012.
  • [19] Karaduman Y. and Onal, L., “Flexural behavior of commingled jute/polypropylene nonwoven fabric reinforced sandwich composites,” Compos. Part B Eng., vol. 93, pp. 12–25, May 2016.
  • [20] ASTM, C.-393 “Standard Test Method for Flexural Properties of Sandwich Constructions,” ASTM International, 2000.
  • [21] Karabulut, N. Aktaş, M. and Balcıoğlu, H. E., “Surface Modification Effects on the Mechanical Properties of Woven Jute Fabric Reinforced Laminated Composites,” J. Nat. Fibers, pp. 1–15, Jan. 2018.
  • [22] Sideridis E. and Papadopoulos, G. A., “Short-beam and three-point-bending tests for the study of shear and flexural properties in unidirectional-fiber-reinforced epoxy composites,” J. Appl. Polym. Sci., vol. 93, no. 1, pp. 63–74, Jul. 2004.
  • [23] Setyawan, P. Sugiman, D. and Saputra, Y., “Characterization of compressive and short beam shear strength of bamboo opened cell foam core sandwich composites,” 2016, p. 040016.
  • [24] ASTM, D-2344 “Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates,” ASTM International, 2000.
Birincil Dil en
Konular Mühendislik ve Temel Bilimler
Dergi Bölümü Makaleler
Yazarlar

Orcid: orcid.org/0000-0002-8579-5142
Yazar: H Ersen Balcıoğlu (Sorumlu Yazar)
Kurum: USAK UNIVERSITY, FACULTY OF ENGINEERING, DEPARTMENT OF MECHANICAL ENGINEERING
Ülke: Turkey


Bibtex @araştırma makalesi { muglajsci421813, journal = {Mugla Journal of Science and Technology}, issn = {2149-3596}, address = {Mugla Sitki Kocman University}, year = {2018}, volume = {4}, pages = {64 - 73}, doi = {10.22531/muglajsci.421813}, title = {FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL}, key = {cite}, author = {Balcıoğlu, H Ersen} }
APA Balcıoğlu, H . (2018). FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL. Mugla Journal of Science and Technology, 4 (1), 64-73. DOI: 10.22531/muglajsci.421813
MLA Balcıoğlu, H . "FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL". Mugla Journal of Science and Technology 4 (2018): 64-73 <http://dergipark.gov.tr/muglajsci/issue/37235/421813>
Chicago Balcıoğlu, H . "FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL". Mugla Journal of Science and Technology 4 (2018): 64-73
RIS TY - JOUR T1 - FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL AU - H Ersen Balcıoğlu Y1 - 2018 PY - 2018 N1 - doi: 10.22531/muglajsci.421813 DO - 10.22531/muglajsci.421813 T2 - Mugla Journal of Science and Technology JF - Journal JO - JOR SP - 64 EP - 73 VL - 4 IS - 1 SN - 2149-3596- M3 - doi: 10.22531/muglajsci.421813 UR - http://dx.doi.org/10.22531/muglajsci.421813 Y2 - 2018 ER -
EndNote %0 Mugla Journal of Science and Technology FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL %A H Ersen Balcıoğlu %T FLEXURAL BEHAVIORS OF SANDWICH COMPOSITES PRODUCED USING RECYCLED AND NATURAL MATERIAL %D 2018 %J Mugla Journal of Science and Technology %P 2149-3596- %V 4 %N 1 %R doi: 10.22531/muglajsci.421813 %U 10.22531/muglajsci.421813
ISNAD Balcıoğlu, H Ersen . "GERİ DÖNÜŞTÜRÜLMÜŞ VE DOĞAL MALZEME KULLANILARAK ÜRETİLEN SANDVİÇ KOMPOZİTLERİNİN EĞİLME DAVRANIŞLARI". Mugla Journal of Science and Technology 4 / 1 (Haziran 2018): 64-73. http://dx.doi.org/10.22531/muglajsci.421813