Year 2019, Volume , Issue , Pages 431 - 436 2019-06-01

Kinematic Analysis of Tapping Machine and Simulation with Simmechanics
Kinematic Analysis of Tapping Machine and Simulation with Simmechanics

Güllü Akkaş [1] , İhsan Korkut [2]

66 138

In this study, the design, kinematic analysis and simulation of a 4-degree-of-freedom tapping machine were performed. Solidworks software was used. The design was transferred to the Simmechanics module and transformed into MATLAB blocks. The results of kinematic analysis were introduced to the system with Mfunctions, and the movement of the system was controlled depending on the position input. The tapping machine design is computer controlled and is a suitable solution for tapping on automation supported assembly lines.

In this study, the design, kinematic analysis and simulation of a 4-degree-of-freedom tapping machine were performed. Solidworks software was used. The design was transferred to the Simmechanics module and transformed into MATLAB blocks. The results of kinematic analysis were introduced to the system with Mfunctions, and the movement of the system was controlled depending on the position input. The tapping machine design is computer controlled and is a suitable solution for tapping on automation supported assembly lines.

  • [1] Brooks R, "Flesh and Machines", Pantheon Books, New York (2002).
  • [2] Craig J. J., "Introduction Robotics Mechanics and Control", Prentice, New Jersey, (2005).
  • [3] Bhowmick S., Lukitsch M. J. and Alpas A. T., "Tapping of Al-Si alloys with diamond-like carbon coated tools and minimum quantity lubrication", Journal of Materials Processing Technology, 210(15): 2142-2153, (2010).
  • [4] Uzun G., Korkut İ., "Effect of cutting conditions on the cutting torque and tool life in the tapping process for AISI 304 stainless steel", Materials and Technology, 50(2):275-280 (2016).
  • [5] Uzun G., Korkut İ., “The effect of cryogenic treatment on tapping”, The International Journal of Advanced Manufacturing Technology, 67:857-864 (2013).
  • [6] Avuncan G., "Economy of Cutting and Cutting Tools (Talaş Kaldırma Ekonomisi ve Kesici Takımlar)", Mavi Tanıtım ve Pazarlama Ltd. Şti., Gebze, (1998).
  • [7] Akkurt M., "Machining methods and machine tools (Talaş Kaldırma Yöntemleri ve Takım Tezgahları)", Birsen Yayınevi, Turkey, (1992).
  • [8] Sharma R., Kumar V., Gaur P. , Mittal A. P., "An adaptive PID like controller using mix locally recurrent neural network for robotic manipulator with variable payload", ISA Transaction,62: 258-267, (2016).
  • [9] Zhao D., Ni W. , Zhu Q., "A framework of neural networks based consensus control for multiple robotic manipulators", Neurocomputing, 140: 8-18, (2014).
  • [10] Messay T., Ordóñez R., Marcil E. "Computationally efficient and robust kinematic calibration methodologies", Robotics and Computer-Integrated Manufacturing , 37: 33-48, (2016).
  • [11] Malek K. A., Othman S., "Multiple sweeping using the Denavit–Hartenberg representation method", Computer-Aided Design, 31:567-583, (1999).
  • [12] Balkan T., Özgören M. K., Arıkan M. S., Baykurt H. M., "A method of inverse kinematics solution including singular", Mechanism and Machine Theory , 35:1221-1237, (2000).
  • [13] Chikhaoui M. T., Rabenorosoa K., Andreff N., "Kinematics and performance analysis of a novel concentric tube", Mechanism and Machine Theory, 104:234-254, (2016).
  • [14] Siciliano B., Sciavicco L., Villani L., Oriolo G., "Robotics: Modelling, Planning and Control", Springer, London, (2009).
  • [15] Hijazi A., Brethé J. F. , Lefebvre D., "Singularity analysis of a planar robotic manipulator: Application to an XY-Theta platform", Mechanism and Machine Theory, 100: 104-119, (2016).
  • [16] Zheng wen L., Guo-liang Z., Wei-ping Z. , Bin J. "A Simulation Platform Design of Humanoid Robot Based on SimMechanics and VRML", Procedia Engineering, 15 : 215-219, (2011).
Primary Language en
Subjects Engineering
Journal Section Research Article
Authors

Author: Güllü Akkaş (Primary Author)

Author: İhsan Korkut

Bibtex @research article { politeknik417763, journal = {Politeknik Dergisi}, issn = {}, eissn = {2147-9429}, address = {Gazi University}, year = {2019}, volume = {}, pages = {431 - 436}, doi = {10.2339/politeknik.417763}, title = {Kinematic Analysis of Tapping Machine and Simulation with Simmechanics}, key = {cite}, author = {Akkaş, Güllü and Korkut, İhsan} }
APA Akkaş, G , Korkut, İ . (2019). Kinematic Analysis of Tapping Machine and Simulation with Simmechanics. Politeknik Dergisi, (), 431-436. DOI: 10.2339/politeknik.417763
MLA Akkaş, G , Korkut, İ . "Kinematic Analysis of Tapping Machine and Simulation with Simmechanics". Politeknik Dergisi (2019): 431-436 <http://dergipark.gov.tr/politeknik/issue/44136/417763>
Chicago Akkaş, G , Korkut, İ . "Kinematic Analysis of Tapping Machine and Simulation with Simmechanics". Politeknik Dergisi (2019): 431-436
RIS TY - JOUR T1 - Kinematic Analysis of Tapping Machine and Simulation with Simmechanics AU - Güllü Akkaş , İhsan Korkut Y1 - 2019 PY - 2019 N1 - doi: 10.2339/politeknik.417763 DO - 10.2339/politeknik.417763 T2 - Politeknik Dergisi JF - Journal JO - JOR SP - 431 EP - 436 VL - IS - SN - -2147-9429 M3 - doi: 10.2339/politeknik.417763 UR - https://doi.org/10.2339/politeknik.417763 Y2 - 2019 ER -
EndNote %0 Journal of Polytechnic Kinematic Analysis of Tapping Machine and Simulation with Simmechanics %A Güllü Akkaş , İhsan Korkut %T Kinematic Analysis of Tapping Machine and Simulation with Simmechanics %D 2019 %J Politeknik Dergisi %P -2147-9429 %V %N %R doi: 10.2339/politeknik.417763 %U 10.2339/politeknik.417763
ISNAD Akkaş, Güllü , Korkut, İhsan . "Kinematic Analysis of Tapping Machine and Simulation with Simmechanics". Politeknik Dergisi / (June 2019): 431-436. https://doi.org/10.2339/politeknik.417763