Yıl 2018, Cilt 10, Sayı 2, Sayfalar 202 - 213 2018-06-29

Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties

Munise Didem DEMİRBAŞ [1] , Mustafa Kemal APALAK [2]

58 71

In this study, thermal residual stress analysis of Functionally Graded Circular Plates joined with adhesive (FGCP-A) is presented. Finite difference equations are used in solving Navier’s equations of elasticity and heat transfer. The grading along the plate is made along the surface of the plate. Material properties of the plate are investigated depending on the temperature dependent/independent and it is assumed that the temperature independent material properties changed according to the Mori-Tanaka approach. Grading along the plate is made in both radial and angular directions.  In this study, the effects of temperature dependent/independent material properties and compositional gradient exponents on temperature, equivalent strain and equivalent stress are compared.  As a result, when considering the properties of the material depending on the temperature, the temperature, equivalent stress and strain distributions and levels vary considerably. Therefore, the properties of the material dependent on the temperature must be taken into consideration in the analysis of thermal residual stress of materials used as high temperature material.

Functionally graded circular plates, Finite difference methods, Thermal residual stress, adhesive, temperature-dependent material properties
  • Noda, N. (1999). Thermal stress intensity factor for functionally gradient plate with an edge crack. Journal of Thermal Stresses. 22(4-5), 477-512. doi: 10.1080/01495739708956108.
  • Choules, B.D. & Kokini, K. (1996). Architecture of functionally graded ceramic coatings against surface thermal fracture. Journal of Engineering Materials and Technology. 118(4). 522-528. doi: 10.1115/1.2805951.
  • Moosaie, A. & Panahi-Kalus, H. (2017). Thermal stresses in an incompressible FGM spherical shell with temperature-dependent material properties. Thin-Walled Structures. 120. 215-224. doi: 0.1016/j.tws.2017.09.005.
  • Mehditabar, A., Rahimi, G.H. & Tarahhomi, M.H. (2017). Thermo-elastic analysis of a functionally graded piezoelectric rotating hollow cylindrical shell subjected to dynamic loads. Mechanics of Advanced Materials and Structures. 1. 1-12. doi:10.1080/15376494.2017.1329466.
  • Ebrahimi, F. & Jafari, A. (2018). A four-variable refined shear-deformation beam theory for thermo-mechanical vibration analysis of temperature-dependent FGM beams with porosities. Mechanics of Advanced Materials and Structures. 25(3). 212-224. doi:10.1080/15376494.2016.1255820.
  • Manthena, V.R. & Kedar, G.D. (2018). Transient thermal stress analysis of a functionally graded thick hollow cylinder with temperature-dependent material properties. Journal of Thermal Stresses. 41(5). 568-582. doi: 10.1080/01495739.2017.1402669.
  • Apalak, M.K. & Bagci, M.D. (2011). Thermal residual stresses in adhesively bonded in-plane functionally graded clamped circular hollow plates. Journal of Adhesion Science and Technology. 25. 1861-1908. doi:10.1080/01694243.2012.747732.
  • Apalak, M.K. (2014). Functionally graded adhesively bonded joints. Reviews of Adhesion and Adhesives. 1. 56-84. doi: 10.1002/9781119162346.ch3.
  • Nimje, S.V. & Panigrahi, S.K. (2017). Stress and failure analyses of functionally graded adhesively bonded joints of laminated frp composite plates and tubes: a critical review. Reviews of Adhesion and Adhesives. 5(2). 162-194. doi: 10.1002/9781119526445.ch5.
  • Iwasawa C., Nagata, M., Seino, Y. & Ono, M. (1997). A study on anode materials and structures for SOFC. Proceedings of the Fifth International Symposium on Solid Oxide Fuel Cells (SOFC-V). 97(40). 626-634.
  • Wang, Y., Chen, K.S., Mishler, J., Cho, S.C. & Adroher, X.C. (2011). A review of polymer electrolyte membrane fuel cells: Technology, applications, and needs on fundamental research. Applied Energy. 88(4). 981-1007. doi: 10.1016/j.apenergy.2010.09.030.
  • Kakac, S., Pramuanjaroenkij, A. & Zhou, X.Y. (2007). A review of numerical modeling of solid oxide fuel cells. International Journal of Hydrogen Energy. 32(7). 761-786. doi: 10.1016/j.ijhydene.2006.11.028.
  • Ruys, A., Popov, E., Sun, D., Russell, C. & Murray, C. (2001). Functionally graded electrical/thermal ceramic systems. Journal of the European Ceramic Society. 21(10-11). 2025-2029. doi:10.1016/S0955-2219(01)00165-0.
  • Noda, N. (1997). Thermal stresses intensity factor for functionally gradient plate with an edge crack. J. Therm. Stresses. 20. 373-387. doi: 10.1080/01495739708956108.
  • Nemat-Alla, M. (2003). Reduction of thermal stresses by developing two-dimensional functionally graded materials. International Journal of Solids and Structures. 40(26). 7339-7356. doi:10.1007/s00707-008-0136-1.
  • Tomota, Y., Kuroki, K., Mori, T. & Tamura T. (1976). Tensile deformation of two-ductile-phase alloys: flow curves of α → γ Fe–Cr–Ni alloys. Mater. Sci. Eng. 24. 85-94. doi:10.1016/0025-5416(76)90097-5.
  • Wakashima, K. & Tsukamoto, H. (1991). Mean-field micromechanics model and its application to the analysis of thermomechanical behavior of composite materials. Mater. Sci. Eng. A. 146. 291-316. doi:10.1016/0921-5093(91)90284-T.
  • Levin, V.M. (1967). On the coefficients of thermal expansion of heterogeneous material. Mech. Solids. 2. 88-94. Mori, T. & Tanaka, K. (1973). Average stress in matrix and average elastic energy of materials with misfittings inclusions. Acta Metallurgica. 21(5). 517-574.
  • Materials Information Resource MatWeb [Online]. (2016). Available: http://www.matweb.com. Cubberiy, W.H. (1989). Properties and selection: nonferrous alloys and pure metals. Metal Handbook Ninth Edition. ASM. Metals Park. Ohio. vol.2.
  • Touloukian, Y.S., Powell, R.W., Ho, C.Y. & Nicolaou, M.C. (1973). thermophysical properties of matter-the tprc data series, volume 10. thermal diffusivity. IFI Plenum. New-York. Washington. vol.10.
  • Matlab. (2009). Mathematical software. version 2009a. TheMathWorks.
Birincil Dil en
Konular Mühendislik, Ortak Disiplinler
Dergi Bölümü Makaleler
Yazarlar

Yazar: Munise Didem DEMİRBAŞ (Sorumlu Yazar)

Yazar: Mustafa Kemal APALAK

Bibtex @araştırma makalesi { umagd444080, journal = {Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi}, issn = {}, eissn = {1308-5514}, address = {Kırıkkale Üniversitesi}, year = {2018}, volume = {10}, pages = {202 - 213}, doi = {10.29137/umagd.444080}, title = {Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties}, key = {cite}, author = {APALAK, Mustafa Kemal and DEMİRBAŞ, Munise Didem} }
APA DEMİRBAŞ, M , APALAK, M . (2018). Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties. Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi, 10 (2), 202-213. DOI: 10.29137/umagd.444080
MLA DEMİRBAŞ, M , APALAK, M . "Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties". Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi 10 (2018): 202-213 <http://dergipark.gov.tr/umagd/issue/38203/444080>
Chicago DEMİRBAŞ, M , APALAK, M . "Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties". Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi 10 (2018): 202-213
RIS TY - JOUR T1 - Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties AU - Munise Didem DEMİRBAŞ , Mustafa Kemal APALAK Y1 - 2018 PY - 2018 N1 - doi: 10.29137/umagd.444080 DO - 10.29137/umagd.444080 T2 - Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi JF - Journal JO - JOR SP - 202 EP - 213 VL - 10 IS - 2 SN - -1308-5514 M3 - doi: 10.29137/umagd.444080 UR - http://dx.doi.org/10.29137/umagd.444080 Y2 - 2018 ER -
EndNote %0 Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties %A Munise Didem DEMİRBAŞ , Mustafa Kemal APALAK %T Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties %D 2018 %J Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi %P -1308-5514 %V 10 %N 2 %R doi: 10.29137/umagd.444080 %U 10.29137/umagd.444080
ISNAD DEMİRBAŞ, Munise Didem , APALAK, Mustafa Kemal . "Thermal Residual Stresses Analyses of Two-Dimensional Functionally Graded Circular Plates with Temperature-Dependent Material Properties". Uluslararası Mühendislik Araştırma ve Geliştirme Dergisi 10 / 2 (Haziran 2018): 202-213. http://dx.doi.org/10.29137/umagd.444080