Yıl 2018, Cilt 1, Sayı 2, Sayfalar 76 - 86 2018-12-30

CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN

Rafet Can ÜMÜTLÜ [1] , Berkan HIZARCI [2] , Hasan OZTURK [3] , Zeki KIRAL [4]

12 50

Gearboxes that are frequently used as power transmission elements are experienced various faults over time. The pitting fault, which is one of these faults, is usually caused by insufficient lubrication and overloading. Detecting pitting fault and identifying different pitting levels are challenging subjects in gear fault detection. This study aims to propose a method to classify the different levels of pitting fault in helical gearbox. It is known that gear defects illustrate themselves in vibration signal at gear mesh frequency (GMF) and its harmonics. As the severity of faults on the tooth surface grows, the amplitude of these frequencies usually increases in the frequency spectrum. Frequency component based statistical analysis (FCSA) method is utilized to obtain stronger indicators for fault classification. In this study, frequency component based statistical analysis calculates the mean, standard deviation, RMS and Kurtosis values of narrowband gear vibrations obtained around the GMF and its harmonics in order to detect these increases in the frequency spectrum. Moreover, these statistical parameters are then used as an input for training and testing of artificial neural network (ANN) for classification of pitting faults. Furthermore, the pitting fault is detected and different pitting levels are classified. It has been found that the proposed approach is quite beneficial for not only detection, but also classification of pitting fault levels in helical gearboxes.
ANN, fault classification, helical gear, pitting, vibration, spectrum analysis
  • H. Öztürk, M. Sabuncu, I. Yesilyurt. Early detection of pitting damage in gears using mean frequency of scalogram, Journal of Vibration and Control 14 (2008) 469–484, DOI: 10.1177/1077546307080026.
  • L. Hong, J. S. Dhupia. A time domain approach to diagnose gearbox fault based on measured vibration signals, Journal of Sound and Vibration 333 (2014) 2164–2180.
  • F. Elasha, C. R. Carcel, D. Mba, G. Kiat, I. Nze, G. Yebra. Pitting detection in worm gearboxes with vibration analysis, Engineering Failure Analysis 42 (2014), 366–376.
  • Ümütlü, Rafet Can, Hasan Ozturk, and Zeki Kiral. "Pitting detection in a worm gearbox using artificial neural networks." INTER-NOISE and NOISE-CON Congress and Conference Proceedings. Vol. 253. No. 6. Institute of Noise Control Engineering (2016)
  • Z. Peng, N.J. Kessissoglou, M. Cox. A study of the effect of contaminant particles in lubricants using wear debris and vibration condition monitoring techniques, Wear 258 (2005) 1651–1662.
  • Z. Peng, N. J. Kessissoglou. An integrated approach to fault diagnosis of machinery using wear debris and vibration analysis, Wear 255 (2003) 1221–1232.
  • S. Bagavathiappan, B. B. Lahiri, T. Saravanan, J. Philip, T. Jayakumar. Infrared thermography for condition monitoring–a review, Infrared Physics & Technology, (2013) 60, 35-55.
  • T. Toutountzakis, K. T. Chee, M. David. Application of acoustic emission to seeded gear fault detection, NDT & E International 38.1 (2005) 27-36.
  • K. Worden, J. M. Dulieu-Barton. An overview of intelligent fault detection in systems and structures, Structural Health Monitoring 3.1 (2004) 85-98.
  • M. H. Benbouzid, A review of induction motors signature analysis as a medium for faults detection, IEEE transactions on industrial electronics 47.5 (2000) 984-993.
  • S. Ebersbach, Z. Peng. Expert system development for vibration analysis in machine condition monitoring, Expert Systems with Applications 34 (2008) 291–299.
  • F.P.G. Marquez, A.M. Tobias, J.M. P. Perez, M. Papaelias. Condition monitoring of wind turbines: Techniques and methods, Renewable Energy 46 (2012) 169–178.
  • J. Zarei, M.A. Tajeddini, H.R. Karimi. Vibration analysis for bearing fault detection and classification using an intelligent filter, Mechatronics 24 (2014) 151–157.
  • A. K. S. Jardine, D. Lin, D. Banjevic. A review on machinery diagnostics and prognostics implementing condition-based maintenance, Mechanical Systems and Signal Processing 20 (2006) 1483–1510.
  • P. K. Kankar, C. S. Sharma, S. P. Harsha. Fault diagnosis of ball bearings using machine learning methods, Expert Systems with applications 38.3 (2011) 1876-1886.
  • M. Jamil, S. K. Sharma, R. Singh. Fault detection and classification in electrical power transmission system using artificial neural network, SpringerPlus 4.1 (2015) 334.
  • B. Samantha. Gear fault detection using artificial neural networks and support vector machines with genetic algorithms, Mechanical Systems and Signal Processing 18 (2004) 625–644.
  • B. Samanta, K. R. Al-Balushi, S. A. Al-Araimi. Artificial neural networks and support vector machines with genetic algorithm for bearing fault detection, Engineering Applications of Artificial Intelligence 16.7 (2003) 657-665.
  • Rumelhart, D. E., McClelland, J. L. Parallel distributed processing, explorations in the microstructure of cognition, MIT Press, (1986)
  • Sorsa T., Koivo H. N., Koivisto H. Neural Networks in Process Fault Diagnosis. IEEE Transactions on Systems 21 815-825, (1991)
  • McCormick A. C. and Nandi A. K., Classification of the rotating machine condition using artificial neural networks. Proc. Instn. Mech. Engrs, Part C, Journal of Mechanical Engineering Science 211, 439–450. 1997
  • Samanta B. and Al-Balushi K.R., Use of time domain features for the neural network based fault diagnosis of a machine tool coolant system, Proceedings of Institution of Mechanical Engineers, Part I: Journal of Systems and Control Engineering 215, 199–207. (2001)
  • Kang, Y., Wang, C. C., Chang, Y. P., Hsueh, C. C., Chang, M. C., Certainty Improvement in Diagnosis of Multiple Faults by Using Versatile Membership Functions for Fuzzy Neural Networks, Lecture Notes in Computer Science, 3973 370-375, (2006)
Birincil Dil en
Konular Mühendislik, Ortak Disiplinler
Dergi Bölümü Articles
Yazarlar

Yazar: Rafet Can ÜMÜTLÜ (Sorumlu Yazar)
Kurum: DOKUZ EYLUL UNIVERSITY
Ülke: Turkey


Yazar: Berkan HIZARCI
Kurum: DOKUZ EYLUL UNIVERSITY, .
Ülke: Turkey


Yazar: Hasan OZTURK
Kurum: DOKUZ EYLUL UNIVERSITY, .
Ülke: Turkey


Yazar: Zeki KIRAL
Kurum: DOKUZ EYLUL UNIVERSITY
Ülke: Turkey


Bibtex @araştırma makalesi { uujes473593, journal = {Usak University Journal of Engineering Sciences}, issn = {}, eissn = {2651-3447}, address = {Uşak Üniversitesi}, year = {2018}, volume = {1}, pages = {76 - 86}, doi = {}, title = {CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN}, key = {cite}, author = {KIRAL, Zeki and ÜMÜTLÜ, Rafet Can and OZTURK, Hasan and HIZARCI, Berkan} }
APA ÜMÜTLÜ, R , HIZARCI, B , OZTURK, H , KIRAL, Z . (2018). CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN. Usak University Journal of Engineering Sciences, 1 (2), 76-86. Retrieved from http://dergipark.gov.tr/uujes/issue/41590/473593
MLA ÜMÜTLÜ, R , HIZARCI, B , OZTURK, H , KIRAL, Z . "CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN". Usak University Journal of Engineering Sciences 1 (2018): 76-86 <http://dergipark.gov.tr/uujes/issue/41590/473593>
Chicago ÜMÜTLÜ, R , HIZARCI, B , OZTURK, H , KIRAL, Z . "CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN". Usak University Journal of Engineering Sciences 1 (2018): 76-86
RIS TY - JOUR T1 - CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN AU - Rafet Can ÜMÜTLÜ , Berkan HIZARCI , Hasan OZTURK , Zeki KIRAL Y1 - 2018 PY - 2018 N1 - DO - T2 - Usak University Journal of Engineering Sciences JF - Journal JO - JOR SP - 76 EP - 86 VL - 1 IS - 2 SN - -2651-3447 M3 - UR - Y2 - 2018 ER -
EndNote %0 Usak University Journal of Engineering Sciences CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN %A Rafet Can ÜMÜTLÜ , Berkan HIZARCI , Hasan OZTURK , Zeki KIRAL %T CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN %D 2018 %J Usak University Journal of Engineering Sciences %P -2651-3447 %V 1 %N 2 %R %U
ISNAD ÜMÜTLÜ, Rafet Can , HIZARCI, Berkan , OZTURK, Hasan , KIRAL, Zeki . "CLASSIFICATION OF HELICAL GEAR FAULT LEVELS USING FREQUENCY COMPONENT BASED STATISTICAL ANALYSIS WITH ANN". Usak University Journal of Engineering Sciences 1 / 2 (Aralık 2018): 76-86.